What are the protective measures for paper yarn during storage?

As an important raw material in the textile industry, the quality of paper yarn directly affects the performance and quality of subsequent products. During storage, if the protective measures are not taken seriously, the paper yarn may be affected by many factors such as the environment and handling, resulting in quality degradation or even scrapping. Therefore, paper yarn manufacturers and distributors must strictly implement a series of protective measures to ensure that the paper yarn remains in good condition during storage and avoid unnecessary losses.

During the transportation and handling of paper yarn, the following points should be noted. When loading, paper yarn should be loaded in single pieces, arranged neatly, and the stacking height should not exceed 2 layers to prevent deformation caused by excessive pressure. After loading, effective fixing measures should be taken to avoid slipping or overturning due to bumps during transportation. Forklifts should be used when loading and unloading and handling paper yarn to prevent throwing and rolling, and to avoid loose pieces or damage to the paper yarn. After loading, the goods should be covered with rain cloth to prevent rain, moisture and exposure on the way to keep the paper yarn dry and intact.

The acceptance work of paper yarn after entering the factory is extremely important. The following are specific acceptance items. Confirm whether the brand, specification, grade and quantity of the paper yarn are consistent with the order, and ensure that the purchased paper yarn meets the production requirements. Check whether the outer packaging of the paper yarn is intact, whether there are any bumps, damages, etc., to determine whether there is any damage during transportation. Open the outer packaging of the paper yarn to check whether there is moisture, discoloration, etc. For paper yarn with special requirements, sampling and testing should be carried out in strict accordance with the testing standards to ensure that its various indicators meet the requirements.

The storage of paper yarn is directly related to its quality stability, so the protection measures during storage cannot be ignored. Paper yarn should be stored in a dry and ventilated warehouse to avoid moisture absorption and deterioration of paper yarn in a humid environment. The relative humidity in the warehouse should be maintained between 50% and 65%, and the temperature should be controlled between 15 and 25℃ to avoid the influence of high or low temperature on the performance of paper yarn.

Paper yarn should not be in direct contact with the ground and walls, and should be raised with pallets or pads to maintain good ventilation. The stacking height should not be too high, generally not more than five meters, to prevent the lower layer of paper yarn from being crushed, and to avoid collapse caused by stacking too high. Paper yarns of different specifications and uses should be classified and stacked for easy management and use.

Warehouses should avoid direct sunlight and use blackout curtains or sunshades to prevent paper yarns from fading and deteriorating. Warehouses should be kept clean to prevent dust and impurities from contaminating paper yarns. At the same time, insect and rodent prevention measures should be taken regularly to prevent insect and rodent pests from invading paper yarns.

Paper yarns should be well packaged before storage and wrapped with moisture-proof paper or plastic film to prevent them from being directly exposed to the air. The packaging material should have a certain strength and toughness to prevent mechanical damage during handling and stacking.

For some paper yarns with special properties or uses, such as high temperature resistant, waterproof, and oil-proof paper yarns, the storage requirements are more stringent. For high temperature resistant paper yarns, they should be stored in a low temperature environment to prevent high temperature from causing performance degradation. For oil-proof paper yarns, they should avoid contact with grease and be stored in an oil-free environment to maintain the oil-proof performance of the paper yarns.

During acceptance, sampling and testing should be carried out in strict accordance with the testing standards for special paper yarns to ensure that their various performance indicators meet the requirements. For special paper yarn, special attention should be paid to the sealing and protective performance of the packaging to ensure that it is not contaminated or damaged during transportation and storage.

As an important industrial raw material, protective measures during the storage of paper yarn are crucial. Through scientific management and strict operation, enterprises can ensure that the paper yarn maintains optimal performance during storage and avoid quality problems caused by environmental factors. Paper yarn manufacturers and distributors should attach great importance to storage management and take a series of effective measures to ensure the quality of paper yarn and the smooth progress of subsequent processing. Only in this way can we occupy a favorable position in market competition and improve the economic benefits of enterprises.